DRC Diesel Resistant Sleeve (DRC)

    Continuous Printable Heatshrink Sleeves 3:1 Ratio

    iTAG Diesel Resistant Printable Sleeeve 3:1

    Diesel resistant sleeve meets the material and physical property requirements. The material is a radiation cross linked UV stabilised and printable polyolefin. It meets SNCF spec NF F00-608 type A and H. The markers are printed with thermal transfer printers via Eurolabel printing software. Markers are supplied in continuous roll form in a flattened format, having been conditioned for printing with our range of SUMiTAG single and double sided thermal transfer printers. Ideally used where resistance to organic fluids, common fuels, lubricants and solvents properties are required. Typical use in mass transit, aerospace, marine and industrial installations.

    Main Attributes

    • Flame retardant
    • Self extinguishing

    Further properties

    • ALSTOM Approved - DTR Listed
    • Meets SNCF Spec. NF-F00-608 type H
    • Print Performance to Military Standards
    • Continuous reel format
    • Variable length of sleeves as required
    • Colours - Yellow as standard

    Industry Standards:

    • SNCF NF F00-608
    • BS 4G198, Part 3, Type 10A
    • REACH Compliant
    • RoHS Compliant

    Additional Information

    Recommended Printer: -

    Single Sided SumiTag Printer STP-SQX-300-S-NC-S

    Double Sided SumiTag Printer STP-XD4T-300-S-NC-S

    Recommended Ribbon: -

    2020 Series Black

    Print Performance: -

    Adherence: SAE-5942

    Fluid Resistance: MIL202 Method 215K

    Store in original packaging

    Recommended temp. at +10°C to 25°C 45-55% R.H.

    Use within 3 years from date of manufacture



    Continuous Operating Temperature-55°C to +135°C
    Minimum Shrink Temperature for Full Recovery130°C (starts at 100°C)
    Heat Shock (250°Cx4h)Pass no crack, flowing or dripping
    Longitudinal Change+-5% Max.
    Tensile Strength13.8 MPa Min.
    Elongation at Break200% Min.
    Diesel Oil ResistanceNF F00-608
    Secant Modulus172 MPa Min.
    FlammabilityFlame ratarded 60 sec Max. ASTM-D2671 (B)

    Nominal ID Supplied (EID) min mm

    Inner Diameter (RID) Max. mm

    Spool Length (Mtr)

    Wall Thickness Recovered (RWT) (mm) (nom)

    Length of each marker

    Order Code Yellow

    2.40.830 metresnom. 0.50Variable lengthDRC-024-30M-YW-3X
    3.21.1030 metresnom. 0.50upon number of DRC-032-30M-YW-3X
    4.81.6030 metresnom. 0.55characters usedDRC-048-30M-YW-3X
    6.42.1030 metresnom. 0.55for each markerDRC-064-30M-YW-3X
    9.53.2030 metresnom. 0.60DRC-095-30M-YW-3X
    12.76.4030 metresnom. 0.40DRC-127-30M-YW-2X
    19.19.5030 metresnom. 0.46DRC-191-30M-YW-2X
    25.412.720 metresnom. 0.50DRC-254-20M-YW-2X
    38.119.120 metresnom. 0.65DRC-381-20M-YW-2X
    50.825.415 metresnom. 0.65DRC-508-15M-YW-2X

    For further size properties, please view the full datasheet top right...

    • SEI Identification Solutions Ltd - Pysons Road Industrial Estate, Broadstairs, Kent, CT10 2LQ UK
    • T: +44 (0) 1843 865241
    • F: +44 (0) 1843 867180
    • info@sei-id.com
    For High Performance Cable Identification
    and protection systems since 1934

    © 2015 SEI Identification Solutions | Powered by SeaPublish